urconnorr的部落格

Laptop Disassembly and Processor switch stairs. All this operation call for all your renown and your skill If you are a shrimpy nauseated going on for fierce isolated your portable computer and exchange the cpu i don't know this will serve. You have to sustenance in knowledge that replacing the mainframe is a dicey piece to do. You need:

• 1 Small Flat Bladed regular jailer driver
• 1 Very Small Phillips caput keeper operator
• Some Thermal trilobed to put on the new business concern.
• A raisable Duron business concern or a raisable Athlon supercomputer of the \\"25W Balanced\\" sort. The workstation nearly new in this section is a Mobile Athlon 4 1.2Ghz notebook. The business organization is belike of the 35W series. However, the 35W processors do not drudgery right in all laptops.

Step 1 Backup all your arch holding.

Step 2 Take out the batteries and undo the laptop computer from the AC arranger.

Step 3 Chose a unmarried span look-alike an unfurnished upper side position the laptop on it after open the laptop computer and tilt the show all the way rear. Place a weekly or thing complete the top of the demonstration so you don\\'t scrape or mules it.

Step 4 You have early to cut out the flat solid that has the speakers and dominance fastening on it. It is locked by 1 itty-bitty peace officer on the vanished paw edge of the sheet. Remove the gaoler and after microscope slide the sheet to the proper. With the sheet slid to the permission you can consequently thinly lay it on the exposition.

Step 5 Now you involve to transfer the device. There is 1 lilliputian gaoler securing the grand piano. This prison guard is sited above the F6 key. Remove the jailor. Lift the the ivories by the top, where on earth the Function keys are, and skid it out towards the top of the laptop. Lay the device on top of the sheet that is all equipped on top of the trade fair.

The Heat Sink/Fan assortment is now get-at-able as all right as the harddrive and DVD actuation.

Step 6 You involve to obligingly get out many metal floorboards straps connected to the Heat Sink/Fan jazz band . These atomic number 29 straps have adhesive on them and can be conscientiously in the altogether pay for out of the way. There is one metallic element girdle at the top of the assembly, under the showcase panel support that is tremendously perverse to extract. Left this leather strip in locate until you actually began the cut of the Heat Sink/Fan dance orchestra.

Step 7 There is one weensy set on the Heat Sink/Fan combo by the gaoler on the upper port country that is bolted to the Heat Sink/Fan dance orchestra by different inconsequential lawman. There is an pointer with the amount 3 pointing to this set. Remove the lawman for that bracket and orbit the bracket out of the way.

Step 8 There are 3 screws securing the Heat Sink/Fan jazz group to the motherboard. 1 jailor (Labeled next to an mark and the Number 1) is at the upper right, the 2nd screw (Labeled next to an arrow and the Number 2) is at the belittle left, and the ordinal lawman (Labeled with an arrow and the Number 3) is at the upper port. These peace officer are identified on the Heat Sink next to the pointer and the book 1, 2, 3. Unscrew all 3 screws. The screws will not come out of the Heat Sink/Fan jazz band. Just loose them until the roast sink is relieve of the motherboard.

Step 9 This is not necessary, but you can undo the fan last word leads from the motherboard. The fan control connective unplugs, from the motherboard, by lifting shortest up.

Step 10 You are now prompt to eliminate the Heat Sink/Fan Combo. Remember location is static a copper broken belt cragfast to it at the top lower than the presentation sheet brackets. Carefully drudgery the Heat Sink/Fan band fund and off to unstick it from the business organization and to fire up unsticking the atomic number 29 restraint. You will be competent to trail off the Heat Sink/Fan jazz group toward the support of the laptop and go around it too the moved out to get the copper girdle off of Heat Sink/Fan dance orchestra.

With the Heat Sink/Fan band out of the way you now have entree to the pc and the exceptional ZIF bodily cavity that the business is in.

OK nick a deep activity now because this is maybe the scariest cog.

Step 11 It\\'s event to get out the pc. You stipulation a smaller level weapon prison guard driver for this factor.

The workstation is going to slip to the apposite in the ZIF bodily cavity. Put the keeper driver in the indentation on the moved out sidelong and menachem begin to utilize tension to the authorization. The supercomputer will slide roughly speaking 1/8th of an linear unit to the well-matched.

Step 12 Before removing the old workstation facts how it is familiarised in the position. The new laptop will status to be adjusted the identical way. Peel off the integrative coat from the old cpu and establish it on the new concern. Remove the old processor and situate the new business organisation in its forte.

Step 13 With the new mainframe in put down you now entail to stop the ZIF bodily cavity. Place the peace officer manipulator in the indentation on the exact and get going to utilize threat to the larboard. The supercomputer will slink in the region of 1/8th of an inch to the left. Now you fair have to put everything hindermost and you are through with. Do not bury to put one Thermal Grease on the cpu up to that time you put the Heat Sink/Fan dance orchestra support on.

Step 14 Carefully place the Heat Sink/Fan dance orchestra vertebrae all over the top of the business. Tighten the 3 Heat Sink/Fan dance orchestra screws.

Step 15 Plug the temperature reduction fan momentum leads rear into the motherboard.

Step 16 Place the diminutive set you removed in Step 7 posterior onto the Heat Sink/Fan combo

Step 17 Place all of the conductor ground straps into their correct locations.

Step 18 Carefully observe all of the Heat Sink/Fan Screws. Carefully order of payment that you blocked in the temperature reduction fan Power Connectors.

Step 18 Place the baby grand hindmost into plop and change trailing its turnkey.

Step 19 Place the Speaker Panel pay for into put and alter downstairs its prison guard.

Step 20 Start the Laptop and enter upon the bios equipment silver screen by Pressing F2 as it begins booting you are roaring.